background image

20

E-BIKE WARRANTY

WARRANTY INSPECTION

To secure full functionality of the e-bike it 
is recommended to do so-called warranty 
inspection. That is usually done after cycling 
100 or 150 km. During the inspection, all the 
connections are checked, as well as the 
brake and gear setting and the electronic 
system itself. The inspection is done by the 
seller that you purchased your bike at, and 
the seller will also confirm it directly in the 
warranty card. We recommend to carry out 
the warranty inspection within 3 months from 
the warranty validation (usually the date of 
purchase), or after riding ca. 100-150 km. If the 
warranty inspection is not done, e-bike can be 
permanently damaged by continuous use. The 
warranty doesn’t have to be acknowledged 
then.

WARRANTY CLAIM PROCEDURE

• 

 E-bike or battery warranty claim is to be  

 

claimed at the seller you purchased your  

 bike.
• 

When claiming warranty, show the sales  

 

record, warranty card with confirmed  

 

warranty inspection and written serial  

 

numbers of the frame and battery, state  

 

the reason of complaint and describe the  

 defect.

WARRANTY CONDITIONS

24 months

  on the frame and e-bike 

components – applies to manufacturing and 
material defects outside of wear by standard 
use 

12

 

months

 on capacity – nominal capacity 

of the battery will not drop below 70 % of 
its total capacity during 12 months from the 
e-bike’s sale. 

Warranty period is extended

 by 

the time the product spent in warranty repairs.  

Warranty applies only to the first owner. 

WARRANTY CONDITIONS

• 

 E-bike can be used solely for the purpose it  

 

was made for.

• 

 E-bike must be used, stored and maintained  

 

according to this user manual.

• 

 The e-bike must be subjected to a warranty  

 

inspection within three months since the  

 

start of warranty’s validity.

WARRANTY IS VOIDED IF

• 

 it was discovered that the damage    

 

was inflicted because of the user (accident,  

 

unprofessional manipulation beyond  

 

the frame of this manual, unprofessional  

 

tampering with the e-bike’s construction  

 

or electronic system connection, wrong  

 

storage, etc.).

• 

 warranty period has expired.

• 

 it’s a wear created by standard use (i.e.  

 

wear of tires, chain, cassette, chainrings,  

 

brake blocks or pads, etc.).

DISPOSING OF ELECTRIC AND 
ELECTRONIC DEVICES

Used electric or electronic products (motor, 
battery, display, sensors, cables) can’t be 
disposed of together with communal waste. 
For proper disposal, it should be handed over 
at designated collection points, where it will 
be accepted for free. Proper disposal of this 
product you can help save valuable natural 
resources and you help the prevention  of 
potential negative impact on environment and 
human health. More information can be claimed 
from your local authorities or from the closest 
collection point.  Improper disposal of this type 
of waste can lead to fines or other sanctions in 
accordance with national regulations.

Содержание Dakotah

























Отзывы: