Apache Labs ANAN-200D Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 67

Apache Labs ANAN-200D Скачать руководство пользователя страница 22

Chapter 3 – How to operate SSB Phone

You need to accomplish the following;

Proper installation of PowerSDR software

Proper installation, power supply, and normal operation of your ANAN-200D Transceiver as indicated in
the PowerSDR software windows.

Connecting a suitable Microphone

Most “Computer Condenser” microphones will work when directly plugged into the MIC connector on the front
panel of the Apache Transceiver. The Factory settings for Apache Transceivers is to have a small positive voltage
applied to the

TIP

of the connector for

powering a condenser microphone

. The

RING

is connected to

push-to-talk

, and the

SLEEVE

is connected to the Transceiver analog ground. The

SPACE BAR

of your

keyboard acts as the

default push-to-talk

for all microphones. A Computer Condenser mic without a push-to-

talk switch can easily be used by substituting the

SPACE BAR of your KEYBOARD

.

Example: here is a link to a $3 USD microphone using the keyboard space bar for push-to-talk:

http://www.officedepot.com/a/products/969486/Cyber-Acoustics-ACM-51-Boom-Microphone/

MIC Adapters

A Ham style, multi-pin microphone requires an adapter. Various adapters are readily available or can
be wired to the Apache 1/8” Stereo style MIC socket.

http://www.ebay.com/itm/like/191566170362?lpid=82&chn=ps

http://www.gigaparts.com/Product-Lines/Microphone-Adapters/Icom-Mic-Adapter-for-Apache-Labs-
Transceivers.html

The original ANAN Users Guide has several detailed paragraphs about adapters. The Apache Labs
Yahoo Group Files section also has good information about MIC connections and alternatives such
as

Headsets

using a

Virtual Audio Cable

[VAC] utility or “

VB-Audio

”.

If you find that you need to change internal jumpers in the ANAN-100, you can refer to the diagram
below that is published by Phil Harman VK6PH in his Hermes documentation:

http://svn.tapr.org/repos_sdr_hpsdr/trunk/Hermes/Documentation/Hermes_User_Manual_V1.19

Microphone Connector Database

http://www.qsl.net/g4wpw/date.html

If you wish to use a headset, you will need to install a Virtual Audio Cable utility [VAC] or VB-Audio and set it
appropriately in the Setup ---> AUDIO ---> VAC1 or VAC2. Please refer to helpful documentation for VAC in the
Files section of the Apache Labs Yahoo Group

https://groups.yahoo.com/neo/groups/apache-labs/

Copyright Apache Labs © ANAN-200D

22

June 22, 2015

«
...
20
21
22
23
24
...
»

Содержание ANAN-200D




































































Отзывы:

Нет отзывов