4. A D J U S T I N G S T R U T S A N D T I L T
A P A L T E R N A T I V E S © 2020
I N S T A L L A T I O N M A N U A L
9
A. T I L T A D J U S T M E N T
When installing the cee channel,
use the hole pattern that
corresponds to the desired tilt. After
installing one cee channel
correctly, install another several
posts further away. Ensure the tilt
angle, height, and plumb is correct
on both. String a line at the top and
bottom between the two, and use
these as a guide for proper
placement of the remaining cee
channel.
A.
. F I N E H E I G H T A D J U S T M E N T
Sighting down a row, looking from
the east or west, look for
inconsistencies' in the heights of
the racking. Adjust the height by
removing the cee channel
hardware, adjusting the height,
and reattaching the hardware (fig.
B). To lower the cee channel, use a
hole closer to the bottom. To raise,
use a hole further from the bottom.
If more severe adjustments are
needed, refer to "Height
Adjustment" on page 7.
NOTE:
HOLES IN CEE CHANNEL ARE NOMINAL
CONNECTION POINTS USE ADJACENT HOLES
TO ADJUST CEE FORWARDS AND
BACKWARDS USE CORRECT HOLE FOR THE
NEEDED TILT ANGLE
