Manual AP silage cutter
FL
A
P Machinebouw B.V.
- 10 -
5.3
Uncoupling:
Because coupling systems for front loaders and mini loaders are not uniform it
is not possible to completely describe the action “uncoupling” in this manual.
For safety and general instructions with regard to the uncoupling of the AP
silage block cutter we refer to the manual of your tractor, front loader or mini
loader.
We do mention some general important safety and operating instructions:
For a safe uncoupling of the AP silage cutter please follow the instructions
accurately and chronologically:
1
Make sure the surface is flat,
2
Lower the AP silage cutter with a cutting frame that is nearly closed,
then switch off the engine of the tractor / mini loader, completely lower
the cutting frame until the hydraulic system is completely
depressurized,
3
Uncouple the hydraulic hoses between the tractor / mini loader and the
AP silage block cutter,
4
Place the dust hoods on the quick-connectors,
5
Remove the coupling pins with which the AP silage cutter is attached to
the front loader / mini loader,
WARNING: Make sure that the hydraulic hoses of the AP silage cutter
cannot get caught on parts of the tractor / front loader