10
QUCK TIP CHANGE
Insert tip
Use heat guard pad
to pull out the tip.
Remove Tip
Insert tip until
Display stops
showing “- - -”
19
OPERATING GUIDELINES
SLEEP MODE
The system is equipped with a sleep function, the
internal vibration sensor would be able to sense if tool is being
used or not. It will enter sleep “SLP “ if the system has detected
tool has not be used after a preset time. Timer can be set from
1 to 60 minutes.
When system is in sleep mode the display would show the
letters “SLP “ shaking or picking up the tool will immediately
wake the system up and return to the previously working
settings.
Adjusting the Sleep:
1. Press the down button while plugging in the Ritocco the
display would show a number“030” indicating this is the
current set sleep timer. (default 30 minutes)
2. Press the up or down button to adjust sleep timer settings.
Wait for 3—5 seconds, the system will save the new sleep
settings and enter standby mode.
10
QUCK TIP CHANGE
Insert tip
Use heat guard pad
to pull out the tip.
Remove Tip
Insert tip until
Display stops
showing “- - -”
19
OPERATING GUIDELINES
SLEEP MODE
The system is equipped with a sleep function, the
internal vibration sensor would be able to sense if tool is being
used or not. It will enter sleep “SLP “ if the system has detected
tool has not be used after a preset time. Timer can be set from
1 to 60 minutes.
When system is in sleep mode the display would show the
letters “SLP “ shaking or picking up the tool will immediately
wake the system up and return to the previously working
settings.
Adjusting the Sleep:
1. Press the down button while plugging in the Ritocco the
display would show a number“030” indicating this is the
current set sleep timer. (default 30 minutes)
2. Press the up or down button to adjust sleep timer settings.
Wait for 3—5 seconds, the system will save the new sleep
settings and enter standby mode.
