aoyue INT853A, Руководство по эксплуатации

Страница: 5 / 8

© by WilTec Wildanger Technik GmbH Item 90853A Page 5
http://www.WilTec.de
http://www.aoyue.eu 09 2021 -1
http://www.teichtip.de
Electrical connection
The electrical connection is made to a 230 V ~ 50 Hz protective contact socket. Protection at least 10 A.
Commissioning
Set up the device on a level and solid location, the temperature of which does not exceed 40
℃
. Position
the device in the site in a horizontal position so that it can work correctly.
Caution!
For your own safety, follow the advice below, otherwise damage and/or injuries could result:
•
The temperatures of parts of the station can be up to 400
℃
during operation, therefore:
◦
Do not use the station near flammable substances such as gases, paper or others.
◦
Avoid touching hot parts of the station, otherwise you could be seriously burned.
◦
Do not touch the metallic parts near the soldering tips.
•
Temperature protection
◦
The device is equipped with an automatic temperature protection which switches off the
device if one of the temperatures is too high.
◦
The device switches on again when the status has returned to normal.
•
Handle the device with care:
◦
Never drop it or expose it to knocks.
◦
Contains sensitive components that could be destroyed if improperly handled.
•
Disconnect the device from the power supply if you do not need it for a long time, if there is a
power failure or before opening it.
•
Potentially harmful fumes are generated during soldering. Only solder in a well-ventilated work
area to avoid harmful concentrations.
•
Do not make any structural changes to the device.