7
7
ASSEMBLY and PREPARATIONS
A. Main Station
As soon as the equipment has been removed from the package,
REMOVE THE SCREW located at the center of the bottom of the main
unit. This screw holds the pump in place during transportation.
B. Soldering Iron Stand
C.Soldering Iron
1. Connect the soldering iron cord assembly to the soldering iron
output terminal found at the lower middle portion of the main unit.
2. Place the soldering iron to the soldering iron stand.
D. Smoke Absorber
1. Attach the smoke absorbing tube to the suction vacuum cap. Make
sure the cord connections are free from tangles.
E. Desoldering Gun
1. Connect the cord of the desoldering gun to the desoldering gun terminal .
2. Connect the vacuum tube to the suction vacuum cap.
3. Place the desoldering gun onto the holder in preparation for usage.
WARNING:
Failure to remove the screw before using the
equipment can cause damage to the system.
②
①
③