20
排除故障指南
Aoyue
936 规格
CARE AND MAINTENANCE
Replacing the heating element
When the heating element has reached the end of its life or has
been damaged it may need to be replaced. The following steps
illustrate how to replace the heating element.
1. Detach the bolts and screws shown in the illustration.
2. Slide off the nozzle and pop out the heating element.
3. Detach the heating element by pulling away both side of the white
plastic connector.
4. Unsolder the last two wires connecting the hand piece and heating
element together.
5. Attach the new heating element’s sensor wires to the hand piece.
this can be done by soldering the wires together. Take note of the
color code of the wires. Use a heat shrinking tube or electrical tape
to protect the solder joints from shorts .
6. Reattach the white plastic connector.
7. Replace the nozzle and refasten the nuts and bolts in the hand
piece.
Replacing the fan
1. When the fan has been deemed inoperable or damaged it may be
replaced by the following steps.
2. Follow steps 1 and 2 of replacing the heating element.
3. Pull out the fan and unsolder the ends of its power wires. Take note
of the placement of the wires as the fan supply has a positive and
negative terminal.
4. Resolder the two wires to the new fan.
5. Replace the nozzle and refasten the nuts and bolts in the hand
piece.
Unfasten screw
Unfasten screw
5
PACKAGE INCLUSION
Power Cord
Hot air gun
Hot air gun holder
Main unit
aoyue
6028
Air Nozzles
1197, 1313
