aoyue 6031 SIROCCO SERIES, Инструкция по эксплуатации

Страница: 4 / 16

4
PRODUCT DESCRIPTION
The Aoyue 6031 Sirocco­Series SMD Rework Station is a 2­in­1 equip­
ment that combines the functionality of Hot Air Gun and Soldering Iron in
one sophisticated package.
One of the notable features of this device is the auto­sleep mode of
both the Hot Air Gun and Soldering Iron — both independent of each other.
This functionality protects the device (and all its components) from excessive
heat for added safety and system protection. The uniquely designed Hot Air
Gun with integrated Sirocco­type fan provides efficient airflow and regulation
for reworking components made of plastic materials. In addition, the well­
crafted air gun provides easy­, snug­fit grip for manageable control of hot air
direction. These and all the complete features will be discussed in greater
detail in the succeeding sections of this manual.
Finally, the unique, innovative design with digital control and display
panel provides precision, safety, and ease of use to match all reworking
requirements.
29
BASIC TROUBLESHOOTING GUIDE
PROBLEM 5: SOLDERING IRON TEMPERATURE DISPLAY PANEL
SHOWS “PLUG” CHARACTERS
Case 1: The system shows “
PLUG
” from the soldering iron temperature dis­
play panel .
SOLUTION 1: Check if the soldering iron connection assembly is prop­
erly connected and secured to the receptacle on the control panel.
SOLUTION 2 : Make sure the soldering iron tip is properly inserted and
secured inside the handle. Lose contacts between the tip and handle can
also cause this error message.
SOLUTION 3: See “ Soldering Iron Error Messages ” on page 26 for
further details.
PROBLEM 6: UNIT SHOWS UNCONVENTIONAL BEHAVIOR
Description: Unit operates erratically.
SOLUTION1: Try to switch OFF the device and switch ON again. Unplug the
system from the main power source and plug in again when necessary
SOLUTION2: Restore unit to default factory setting. switch off/on the unit
and while the product banner is scrolling press and hold the hot­air tempera­
ture up button until the banner finishes scrolling, the unit would revert to its
default factory setting.
PROBLEM 7: DISPLAY AND OTHER DEVICE OPERATION ISSUES
SOLUTION: Try to switch OFF the device and switch ON again. Unplug the
system from the main power source and plug in again when necessary
OTHER PROBLEMS NOT MENTIONED:
Contact the vendor.