3 S
-18-
HEAD
Gyroscope calibration
Step 2:
Now, the APP interface displays the diagram. Hold the drone vertically and
rotate the drone in 3 complete circles. When completed, the controller
emits a “beep” sound and the drone's LED lights become solid.
Attention:
· When the indicate “
Equipment connected (GPS Model)
” in the APP
interface, means is the drone received the GPS signal. Now, the rear LED's
of the drone will flash twice per second.
·Every time the drone is powered on the compass calibration should be
performed.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Slide right to confirm
Front lights
Rear lights
Now, the APP interface displays the diagram. Place the drone on a flat
level surface and . The LED lights of the drone will
flash rapidly for about
3 seconds.
When completed, the front and rear
lights turn solid. Or press the Gyroscope calibration switch “ ” on
the controller. The LED lights of the drone will flash rapidly for about
3
seconds.
When completed, the front and rear lights turn solid.
flash slowly
Solid
flash rapidly
Solid
