Remote control:
Software:
1)Use the remote control or press POWER_KEY for startup; After entering the main menu of the SID Stand-alone LED
Display software, the following functions can be selected according to the actual needs: Whiteboard, signal source
and projection screen. More applications are shown in the figure below:
2)When the video source is connected to the SID Stand-alone LED Display, you can click the signal source and select
channel HDMI1 or HDMI2 according to the connected signal source actually, and the SID Stand-alone LED Display
Note:
1.when starting up by the power switch,use the infrared
mode
，
the remote control needs to be against the
infrared receiving head (button left Corner of the LED
display).
2.There may be differences in definition of remote
control button depending on product version differ-
ences.
Interface
Interface 1
Interface 2
Interface 3
Interface 4
Interface 5
、
6
Interface 7
、
8
、
10
Interface 9
Interface 11
Interface 12
Interface 13
Interface 14
Interface 15
Interface 16
Interface 17
Port 18
Part 19
Brightness control button
volume -
Switch button for signal source
Type C and Type A interfaces support only data functions
Features
USB Control out interface can be used to connect computers and other
devices to realize Sid stand-alone LED display anti control device
SPDIF OUT interface
，
are used to connect the sound and other equipment
Gigabit Ethernet port, used to connect external network to realize
network interconnection
USB3.0 interface, which can be used to access mouse, keyboard, U disk,
Bluetooth speaker, transmitter and other equipment
HDMI interface, which is HDMI input source interface; HDMI1 and HDMI2
(version 2.0) are used to provide audio and video signals
USB2.0 interface, which can be used to access mouse, keyboard, U disk,
Bluetooth speaker, transmitter and other equipment
AC power input of SID stand-alone LED display (Note: refer to the
configuration of parameter table)
DEBUG interface
，
are used to SID program debugging
HDMI interface
（
version1.4
）
, which is HDMI input source interface
，
are
used to provide audio and video signals
POWER KEY switch,Controls the switch on and off of the SID intelligent
appliance, Long press shutdown,short press standby
Indicator light, shutdown state indicator light flashing once every 3 seconds;
On The screen and the standby indicator are steady on
Mute button
direction button
return button
Page turn button
Brightness button
OK
V+
PG+
PG-
V-
Power switch¹
Mouse
Go button
volume )(-)
Main Windows button
07 |
| 08
