Aosom 370-219V00, Инструкция по сборке

Страница: 5 / 11

5
WARNING
- This product must be assembled by an adult.
- When unassembled, this product contains small and sharp parts – keep out the reach
of small children.
- Do not use in traffic.
- This product is not to be used by children under three years of age.
- The seatbelt must be worn when using this product.
- Adult supervision is required when using this product.
- Battery must be charged by an adult. Charge the product before its first use.
- Keep packaging out the reach of children to avoid suffocation.
- Only use parts provided by the manufacturer.
- Ensure children do not play with the charger.
Note:
- Do not use in congested streets, roads, slopes or near drains.
- Do not change the circuit or add electrical devices to the product.
- Do not use the remote control in rain. Keep the car away from water and other liquids
to avoid damage.
- The maximum load is 25kg – this product can be used by one child at a time.
- Ensure the power is switched off when not in use. Remove the battery connector
when it has not been used for a while.
- Before using and charging, check the plug and other parts for any damage.
Maintenance
- Before using, check the wiring, plug, shell and other parts, ensuring there is no
damage.
- When using after a long time, ensure the iron castings are lubricated to avoid rust.
When storing, place the product on a flat surface, ensuring it's out of direct sunlight.
Keep the product indoors or cover with a water-resistant cloth.
- Keep the product away from stoves, ovens and heaters to avoid plastic from thawing.
- Clean its surface with a dry cloth. Clean plastic parts with non-wax furniture polish.
- Do not clean plastic parts with chemical solutions. Do not clean the car with water.
- Do not drive in wet weather – this could damage the generator, circuit system or
battery.
- When not in use, ensure the power is off – the switch should be on 'STOP or 'OFF'.
- Do not use a fuse that does not conform with the agreed specifications.
- Do not make any modifications to this product or circuit system. Any damages must
be fixed by a professional or under the guidance of a professional.