AOR AR2300, Руководство по эксплуатации

Страница: 12 / 24

7
4. CONTROL SOFTWARE OPERATION
4.1 Connecting power
Connect the supplied AC power adapter. If using another power supply, make sure it provides DC10.7V
〜
16V
with at least 2 A of power.
4.2 Power on
Push the power switch on the receiver’s front panel. The LED will turn orange/yellow, indicating the stand-by
mode.
4.3 Starting the control software

Copy the folder “AR2300 CONTROL SOFT” from inside the CD to any folder on your PC. The software does
not need to be installed; it can be run as is.

Double click “AR2300ControlSoft.exe” to start the software.

When you start the software for the first time, Windows might ask you to which COM PORT the receiver
is connected. Providing the correct number is entered, it will be saved in the registry, therefore you
should not need to enter it again. Nevertheless, after connecting the receiver to a different USB port on
your PC, the COM port number might change.

When you start the software for the first time, a message
might ask you to create a “.arc” memory database file.
Don’t worry, you will be able to do it later in chapter 4.4.3,
so the software doesn’t ask for it again, every time you
start it. For now, just click
OK .
Default software layout