Aopos AS230+, Руководство пользователя

Страница: 27 / 70

23
Auto-detection scan
Auto-detect sensor: By setting Enable, the scanner will start operating if any nearby object has been
detected. The laser light of scanner stops scanning when there is a successful reading or no code is
decoded after the Stand-by duration elapsed. Once the laser light stops scanning, the present object
must be removed to enable Auto-detect sensor.
Operating mode:
In stand-The scanner must be placed in the stand to enable Auto-detect sensor.
Always ON-Auto-detect sensor is enabled regardless of the placement of the scanner.
SETUP
Option bar code Option Alpha. entry
Auto-detect sensor Disable
Enable 00
01*
Operation mode In stand
Always ON 00*
01
Stand-by duration 00-99 (second)
00-99
04*
END