AOpen NMCP68PVNT, Руководство пользователя

Страница: 22 / 54

16
2.10 Gigabit LAN
One of the strengths is the Gigabit LAN controller on board, this mother board
provides 10/100/1000Mbps Ethernet for of
fi ce and home use. The Ethernet
RJ45 connector is located above the USB connectors. The right hand sid LED
indicates link mode; it lights in yellow when linking to a network. The left hand
side LED indicates the transfer mode and will light in green when data is
transferring at 100Mbps (never lights while at 10Mbps), and will light in orange
when transferring in Gigabit mode. To enable or disable this function, you
simply adjust it through the BIOS. To enable the LAN wakeup function, you
have to set the “Wake on PCI Card” to enable in the BIOS“Power Management
Setup” section.
Speed
Green 100Mbps
Orange Gigabit
ACT
LED Yellow