3.4 Jumper Settings
33
JP2 Speaker Output
JP14 Clear CMOS Data
Allows you to turn off the voice from buzzer or
speaker. You can choose not to be bothered by
the warning made from Dr. Voice when it detects
any error in operating system.
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
5. Connect ATX power cable back to connector PWR2.
(only for n250a-FR)
Buzzer
(default)
JP2 Speaker Output Jumper
JP14 Clear CMOS Jumper
Normal
(default)
1
1
Clear CMOS
1
Speaker
1
