12. Power-on and Load BIOS Setup
10. JP1 Buzzer Enable/Disable Jumper
This motherboard comes with another considerate option that allows you to turn off the
voice from buzzer. You can choose not to be bothered by the warning made from buzzer
when it detects an error in operating system. To disable this function, set JP1 to pin 2-3 to
stop the buzzer from sending out voices.
After you finish jumper settings and connect correct cables, power on and enter the
BIOS Setup. Press <Del> during POST (Power On Self Test). Choose "Load Setup
Defaults" for recommended optimal performance.
13. AOpen Bonus Pack CD
11. Chassis Intrusion Connector
The “CASE OPEN” header provides chassis intrusion-monitoring function. To make this
function works, you have to enable it in the system BIOS, connect this header to a sensor
somewhere on the chassis. So, whenever the sensor is triggered by lights or by the
opening of the chassis, the system will beep to inform you. Please be informed that this
useful function only applies to advanced chassis, you may purchase an extra sensor, attach
it on your chassis, and make a good use of this function.
You can use the autorun menu of Bonus CD. Choose the utility and driver and select model
name.
Del
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
setting.
Pin1
JP1 (Buzzer)
1
Enable
(Default)
1
Disable
1
Enable
(Default)
1
Disable
