1.
Pull up the CPU socket lever and up to
90-degree angle.
2.
Locate Pin 1 in the socket and look for
a (golden) cut edge on the CPU upper
interface.
Match Pin 1 and cut edge.
Then insert the CPU into the socket.
3.
Press down the CPU socket lever and
finish CPU installation.
Plug in the CPU fan cable to the 3-pin
CPUFAN1
connector. If you have chassis fan, you
can also plug it in
SYSFAN2
or
SYSFAN3
connector.
CPU Ratio
8x, 10x… 21x, 22x, 23x, 24x
CPU FSB
100 MHz.
Northwood CPU
CPU Core
Frequency
FSB
Clock
System
Bus
Ratio
Pentium 4 1.6G
1600MHz
100MHz
400MHz
16x
Pentium 4 1.6G
1600MHz
133MHz
533MHz
12x
Pentium 4 1.7G
1700MHz
133MHz
533MHz
13x
Pentium 4 1.8G
1800MHz
100MHz
400MHz
18x
Pentium 4 2.0G
2000MHz
100MHz
400MHz
20x
Pentium 4 2.2G
2200MHz
100MHz
400MHz
22x
Pentium 4 2.26G
2260MHz
133MHz
533MHz
17x
Pentium 4 2.4G
2400MHz
100MHz
400MHz
24x
Pentium 4 2.4G
2400MHz
133MHz
533MHz
18x
Pentium 4 2.53G
2530MHz
133MHz
533MHz
19x
Pentium 4 2.66G
2660MHz
133MHz
533MHz
20x
Pentium 4 2.8G
2800MHz
133MHz
533MHz
21x
5. Setting CPU Voltage & Frequency
Setting CPU Core Voltage
This motherboard supports CPU VID function. The CPU core voltage will be automatically
detected.
Setting CPU Frequency
This motherboard is CPU jumper-less design, you can set CPU frequency through the
BIOS setup, and no jumpers or switches are needed. The default setting is "table select
mode". You can adjust the FSB from "CPU Host/SDRAM/PCI Clock" for overclocking.
BIOS Setup > Frequency / Voltage Control > CPU Speed Setup
3. Installing Processor
Note: If you do not match the CPU
socket Pin 1 and CPU cut edge well,
you may damage the CPU.
CPU socket lever
Note: Some CPU fans
do not have sensor pin
so they cannot support
fan monitoring.
CPUFAN1 Connector
Warning: SIS 650GX /
651 support maximum
400MHz system bus
and 66MHz AGP clock;
higher clock setting
may cause serious
system damage.
4. Installing CPU & System Fans
SYSFAN2 Connector
This socket supports Micro-FC-PGA2 package CPU, which is the latest CPU package
developed by Intel. Other forms of CPU package are impossible to be fitted in.
SYSFAN3 Connector
GND
+12V
SENSOR
Note: Since the latest
processor, Northwood,
would detect the clock
ratio automatically, you
may not be able to adjust
the clock ratio in BIOS
manually.
Willamette
CPU
CPU Core
Frequency
FSB Clock
System
Bus
Ratio
Pentium 4 1.5G
1500MHz
100MHz
400MHz
15x
Pentium 4 1.6G
1600MHz
100MHz
400MHz
16x
Pentium 4 1.7G
1700MHz
100MHz
400MHz
17x
Pentium 4 1.8G
1800MHz
100MHz
400MHz
18x
Pentium 4 1.9G
1900MHz
100MHz
400MHz
19x
Pentium 4 2.0G
2000MHz
100MHz
400M
Hz
20x
GND
+12V
NC
Celeron
CPU
CPU Core
Frequency
FSB Clock
System
Bus
Ratio
Celeron 1.7G
1700MHz
100MHz
400MHz
17x
Celeron 1.8G
1800MHz
100MHz
400MHz
18x
