AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD disc. Choose the utility and driver and
select model name.
Connecting CD / Modem / AUX_IN
The
CD-IN
connector is used to connect CD Audio
cable from CDROM or DVD drive to onboard sound.
The
Modem-CN
connector is used to connect
Mono In/ Mic Out cable from internal modem card to
onboard sound circuit.
The
AUX_IN
connector is used to connect MPEG Audio
cable from MPEG card to onboard sound.
AUX_IN
Modem-CN
CD-IN
Connector
Pin1
Pin2 Pin3
Pin4
CD-IN
Left
GND GND
Right
Modem-CN
Mono In GND GND Mic Out
AUX_IN
Left
GND GND
Right
Pin 1
Front Audio
RAM Power LED & Blinking LED
The
RAM Power LED
indicates there is power applies to memory. It is useful to check
RAM power during Suspend to RAM. Do not unplug DIMM when this LED is On.
The
Blinking LED
shows you whether system is boot OK. It will continue blinking while
system is at POST procedure, and keep ON while system boot successfully.
Blinking LED
RAM Power
LED
Pin 1
MIC_IN2
VREFOUT
PHONE_R
NC
PHONE_L
GND
+5V
NC
NC
1 2
9 10
If the housing has been design with an audio port on the front panel, you’ll be able to
connect onboard audio to front panel through this connector. By the way, please remove
the jumper cap from the Front Audio Connector before you connect the cable. Do not
remove this yellow jumper cap if housing without an audio port on the front panel.
