1. JP14 Clear CMOS
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD Disc
. Thanks for
the help of saving our earth.
PART NO: 49.88A02.001
DOC. NO: MX3SPU-EG-E0109B
80-wire IDE Cable x1
Floppy Cable x1
Bonus Pack CD x1
This Easy Installation Guide x1
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
5. Connect ATX power cable back to connector PWR2.
Tip:
When should I Clear CMOS?
1. Boot fail because of overclocking…
2. Forget password…
3. Troubleshooting…
Normal Operation
(default)
Clear CMOS
Pin 1
1
1
2. JPX1 Onboard LAN Enable/Disable Jumper
This motherboard provides onboard LAN enable/disable function. You can use the JPX1 to enable or
disable this function.
Enable
(Default)
Disable
JPX1
LAN Select Jumper
1
1
Pin 1
