Pin 1
1. JP14 Clear CMOS
2. JP 17 & JP18 Amplify Select Jumper
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD Disc
. Thanks for
the help of saving our earth.
PART NO: 49.89C01.001
DOC. NO: MK7A-EG-E0108E
Hard Drive IDE Cable x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
Bonus Pack CD x 1
This Easy Installation Guide x 1
Motherboard x 1
This motherboard provides two kinds of audio amplify solution for you choose. If you want to use a
headphone or a speaker without amplifier and connect with “Speaker Out” jack (on the PC99 back plane),
please short the pin 2-3 and 5-6 of JP17, then pin 1-2 and 4-5 of JP18 to enable the audio amplify circuit.
You can clear CMOS to restore system default setting. To clear
the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 and pin 2.
5. Connect ATX power cable back to connector PWR2.
Tip:
When should I Clear CMOS?
1. Boot fail because of overclocking…
2. Forget password…
3. Troubleshooting…
Normal Operation
(default)
Clear CMOS
1
1
JP18
JP17
1 4
3 6
1
4
3
6
JP17
JP18
Enable Amp.
1 4
3 6
1
4
3
6
JP17
JP18
Disable Amp. (Default)
