1. JP14 Clear CMOS
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD
. Thanks for the
help of saving our earth.
PART NO: 49.88D06.001 DOC. NO: MK77M8XN-EG-E0308A
This Easy Installation Guide x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
IEEE 1394 Cable x 1
Serial ATA Cable x 1
IO Shield x 1
Bonus Pack CD x 1
Registration Card x 1
You can clear CMOS to restore system default setting. To clear
the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
5. Connect ATX power cable back to connector PWR2.
Tip: When should I Clear CMOS?
1. Boot fail because of overclocking…
2. Forget password…
3. Troubleshooting…
Normal Operation
(default)
Clear CMOS
1
1
2. Connecting ATX Power Connector
The ATX power supply uses 20-pin connector shown below. Make sure you plug in the right direction.
Pin 1
