Plug in the CPU fan cable to the 3-pin
CPU1 FAN
and
CPU2 FAN
connector. If you have chassis fan, you
can also plug it on
System FAN
(FAN2)
or
AUX FAN
(FAN3)
connector.
Hard Drive IDE Cable x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
Ultra 160 SCSI 68 pin Cable x 1 (DX37 Plus-U only)
Bonus Pack CD disc x 1
User Manual x 1
This Easy Installation Guide x 1
I/O Bracket x 1
ASM x 1 (Optional)
SCSI Utility Driver x 1
1. JP14 Clear CMOS
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD Disc
. Thanks for
the help of saving our earth.
PART NO: 90.53G30.006
DOC. NO: DX37PU-EG-E0112B
Note: Some CPU fans do not have
sensor pin so they cannot support fan
monitoring.
CPU1 Fan Connector
2. Installing CPU & System Fan
FAN1 Connector
FAN3 Connector
FAN2
Connector
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
5. Connect ATX power cable back to connector PWR2.
1
Normal
(default)
1
Clear CMOS
GND
+12V
Sensor
GND
+12V
Sensor
GND
+12V
SENSOR
