AOpen AX6LC Скачать руководство пользователя страница 4

Quick Installation Guide

~4~

4

C:>AOZVHDD /c /file

Please make sure that you have enough continuous HDD space for creating this hidden file.
For  example,  if  you  have  32MB  of  system  memory  and  4MB  of  VGA  memory,  you  need  at
least 36MB (32MB + 4MB) of continuous HDD space. If AOZVHDD failed to allocate the HDD
space,  you  may  run  "DEFRAG"  Utility  or  "Disk  Defragmenter"  which  come  with  MS-DOS  or
Win'95 to free HDD space.

Option2:  Use 

/partiton

 switch (applied to FAT16/FAT32 file system):

To create a separate partiton for Suspend to Hard Drive, please make sure you have reserved
a free partition. We suggest you reserve the free partition which space is appropriate for your
future memory expansion. For example, if you have 32MB of system memory and 4MB of VGA
memory currently,  but  you plan  to  upgrade  system  memory to  64MB  in  the  near  future,  then
you may reserve a 68MB (64MB+4MB) space by using a disk utility (such as fdisk). Next, use
following command to create a suspend partition:

C:>AOZVHDD /c /partition

If  there  is  no  extra  free  partition  and  you  don't  want  your  data  lost,  please  do  not  use  this
partition method.

For more information, please see user's manual.

How to Upgrade BIOS?

To upgrade your BIOS, please follow the steps as below:

1.

Get new BIOS binary file from AOpen's web site. For example, AX6LC120.BIN.

2.

Bootup the system from floppy without loading any memory handler (such as EMM386) or
device driver.

3.

Execute  C:> AOFLASH  AX6LC120.BIN

4.

After loading the new BIOS code, the utility will prompt you to save original BIOS code into
your HDD or floppy. Please press "Y" to store it as "BIOS.OLD".

5.

After the old BIOS has been successfully saved, press "Y" to replace BIOS.

6.

DO NOT turn off the power during "FLASHING".

7.

Reboot the system by turn off the power after "FLASHING".

8.

Press "DEL" key to enter BIOS setup during POST.

9.

Reload the "BIOS SETUP DEFAULT" and reconfigure other items as previous set.

10. Save & Exit. Done!

For more information, please refer to "BIOS Flash Utility" in the user's manual.

Отзывы: