AOpen AX5TC, Руководство пользователя

Страница: 34 / 100

Hardware Installation
2-12
2.2.3 Clearing the CMOS
JP14
1-2
2-3
Clear CMOS
Normal operation (default)
Clear CMOS
You need to clear the CMOS if you forget
your system password. To clear the CMOS,
follow the procedures listed below:
JP14
1
2
3
Normal Operation
(default)
JP14
1
2
3
Clear CMOS
The procedure to clear CMOS:
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pins 1-2.
5. Connect ATX power cable back to connector PWR2.
6. Turn on the system power.
7. Press during bootup to enter the BIOS Setup Utility and specify a
new password, if needed.
Tip: If your system hangs or fails to boot because of
over-clocking, please clear CMOS and the system will
go back to default setting. Except using JP14, you can
also press <Home> key to clear CMOS while system
booting.