Pin 1
1. JP14 Clear CMOS
2. JP35 Enable/Disable Onboard IDE RAID Controller
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
Online
User's Manual
can be found in the
Bonus Pack CD Disc
. Thanks for
the help of saving our earth.
PART NO: 49.89902.011
DOC. NO: AX37DP-EG-E0103A
Hard Drive IDE Cable x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
2
nd
USB Cable x1 (AX37D Plus Only)
DDR Terminator x 1
Bonus Pack CD disc x 1
Norton Anti-Virus CD x 1
Online Manual x 1
This Easy Installation Guide x 1
The JP35 is used to enable or disable onboard PROMISE
®
FastTrak 100 Lite IDE RAID controller. If you
want to disable this controller, please turn off the system power first, and short pin 2 and pin 3 of JP35 by
jumper.
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pins 1 & pin2.
5. Connect ATX power cable back to connector PWR2.
Tip:
When should I Clear CMOS?
1. Boot fail because of overclocking…
2. Forget password…
3. Troubleshooting…
Normal Operation
(default)
Clear CMOS
1
1
Pin 1
Enable
(Default)
Disable
1
1
