AOpen AX34 Pro II, Простое руководство по установке

Страница: 3 / 8

Installing CPU and Fan JP29/JP23 FSB/PCI Clock Ratio
Plug CPU to Socket 370 connector. Be careful of
CPU orientation. Plug in the fan cable to the 3-pin
CPUFAN or FAN connector.
GND
+12V
SENSOR
Setting CPU Frequency
The CPU frequency selection is set by going into:
BIOS Setup > Chipset Features Setup > CPU Voltage Setting
CPU Ratio 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x, 5.5x, 6x, 6.5x, 7x, 7.5x, and 8x
CPU FSB
66.8, 75, 83.3, 100, 103, 105, 110, 112, 115, 120, 124, 133, 140,
and 150 MHz.
Core Frequency = CPU FSB Clock * CPU Ratio
CPU CPU Core Frequency FSB Clock Ratio
CELERON 300A 300MHz 66MHz 4.5x
CELERON 533 533MHz 66MHz 8.0x
CELERON 600 600MHz 66MHz 9.0x
CELERON 667 667MHz 66MHz 10.0x
CELERON 700 700MHz 66MHz 10.5x
CELERON 733 733MHz 66MHz 11.0x
Pentium!!! 600E 600MHz 100MHZ 6.0x
Pentium!!! 700E 700MHz 100MHZ 7.0x
Pentium!!! 800E 800MHz 100MHZ 8.0x
Pentium!!! 850E 850MHz 100MHZ 8.5x
Pentium!!! 733EB 733MHz 133MHZ 5.5x
Pentium!!! 866EB 866MHz 133MHZ 6.5x
Pentium!!! 933EB 933MHz 133MHz 7x
Pentium!!! 1G 1000MHz 133MHz 7.5x
Pentium!!! 1.13G 1133MHz 133MHz 8.5x
Pentium!!! 1.2G 1200MHz 133MHz 9.0x
Note: Some CPU fans do not have
sensor pin, so that cannot support
fan monitoring.
Warning: VIA 694x chipset supports maximum 133MHz FSB and
66MHz AGP clock, higher clock setting may cause serious system
damage.
Home
This jumper is used to specify the relationship of PCI and
FSB clock. Generally speaking, we suggest you do not
change the default setting. But for overclocking, changing
these jumper settings becomes necessary. For example,
you must set JP29 to “5-6” and JP23 to “3-4” if you want to
overclock a 66MHz FSB clock CPU to 100MHz or higher.
Tip: If your system hangs or fails to boot
because of overclocking, simply use
<Home> key to restore the default setting
(233MHz).
Clock Ratio CPU (Host) PCI AGP Memory
2X 66 33 66 PCI x2 or x3
3X 100 33 66 PCI x2 or x3 or x4
3X, overclocking 112 37.3 74.6 PCI x2 or x3 or x4
4X 133 33 66 PCI x3 or x4
4X, overclocking 150 37.5 75 PCI x3 or x4
1 2
Auto
(default)
JP29 JP23
1 2
5 6
5 6
JP29 JP23
4X
(133~150MHz)
1 2
5 6
1 2
5 6
3X
(100~124MHz)
JP29 JP23
1 2
5 6
1 2
5 6
2X
(66~83MHz)
JP29 JP23
1 2
5 6
1 2
5 6