Telephone
PC
Telephone jack
DR814Q
Splitter
Line
ADSL
Phone
LAN
USB
ADSL
Figure 1
Connect the DR814Q
II. Connect to a PC or the Ethernet
The Ethernet ports available with the DR814Q support auto-MDI/MDIX, so you can use
crossover or straight-through cables to connect a PC, hub, or switch to those ports (LAN
1 through LAN 4).
III. Connect to the power adapter
(1) Attach one end of the included power adapter to the DR814Q and the other end to the
power socket.
(2) Approximately one minute after the power-on of the DR814Q, the states of the LEDs
on the front panel should be those listed in Table 1.
Table 1
LED description
LED State
Description
Power
ON
The power is ON and the operation is normal.
Link
ON
The ADSL link is normal.
Act Blinking
Data is being transmitted and/or received on the
ADSL link.
LAN
ON/Blinking
The Ethernet link is normal.
Diag
OFF
Contact the agent for help if this LED is ON.
2
