18
Maintenance&cleaning
Lamps need daily cleaning. Time factor depends on the environment and cleaning cycles
related to the following:
Used with smoking machine, frog machine
High rate of local wind speed (eg: air inlet and outlet)
Dust(Such as stage effect )
If one or more of the above factors, the lamp after 100 hours of operation or need
to check the cleaning, and then periodically checked
Contact technician if any repairs are not mentioned here.
WARNING：
Before opening the lamp housing, disconnect the AC power and allow the lamp
to cool completely
Be careful when cleaning optical components, and want a clean and bright place operations.
Optical Coating fragile and easy to scratch the surface. You can not use solvents will damage
plastic or colored surfaces.
To maintain proper cooling, it is necessary to periodically dust on the fan and vents
Clean Optical parts
1．Cut off power supply and cool the fixture completely. Open the cover shell
2．Clean the dust with air compressor.
3．With tissue paper stained glass cleaner or pure water, wipe out stubborn stains.
But can not scrape the surface should be rubbed gently repeat.。
4．Cotton with alcohol to remove the soot debris. Also available glass cleaner, but
use pure water to clean the residual. Slowly circle clean from the inside to the outside.
5. With a clean and soft cloth or air compressor to dry.
Clean the fan and vents
With a soft brush, cotton, vacuum cleaner or an air compressor, fan and vents to remove
dust.
