11
The forecast refers to the area around the weather station with a radius of about 30 to 50
km for the next 12 to 24 hours.
The accuracy of the weather forecast is around 75 %.
How to add extra sensors
The weather station comes with one wireless sensor. However, you can operate the
weather station with up to three wireless sensors.
Note:
1. You need to set different channels for the sensor (1-3). You can set it through pull the
stick on near the batteries.
2. Under the corresponding channel displayed on the base unit, press and hold the
CHANNEL
button until the signal icon starts to flash to receive the signal from the newly
added sensor.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
