Headphone Demonstrator
Your One-Stop Design Partner For In-Store Advertising Media Player
4
buttons , then leaving the scripts there will not cause malfunction.
Duration, Timeout & Value:
Duration=0
;0 ->for ever loop
;-1 ->end of video
;xxor xxx -> time out, after xx or XXX seconds, it does to next page
Value=1
; The value range can be
1\2\3\4\5\6\7\8, 0 and 15
1 means audio output channel No.1, 8 means audio
output channel No.8; “0” means all the channels are disabled, “15” means all the channels are enabled.
Pad In & Pad Out :
In case that customer music player is connected, there will be two extra interface/page, we define them PADIN.mad
and PADOUT.mad.
For Audio Device plugged in, an extra MAD named “PADIN.MAD” should be added.
“PADIN.MAD” is for the page/interface where no button is pressed;
“PAD00x.MAD” is for the page/interface where No.X of the buttons is pressed;
For Audio Device plugged out, an extra MAD named “PADOUT.MAD” should be added.
“PADOUT.MAD” is just a copy of STARTUP.MAD, it is programmed to go back to STARTUP in firmware.
USB Autocopy:
Create a blank text file named
AUTOCOPY.TXT and copy it into the root of USB drive.
Insert USB drive, all the media files as well as the script .mad files will be copied into the on-board
memory.
*** Please make sure the capacity of internal memory is big enough to accommodate the files needed
to get copied.
The following is the work flow of the unit with four files in each virtual folder.
