AODELAN FT-8, Руководство пользователя

Страница: 8 / 13

Connecting a flash to the FT-8 Receiver hot
shoe
1. Turn off the flash and the FT-8 receiver.
2. Slide the flash into the receiver’s hot shoe mount.
3. Lock the flash with the flash’s locking mechanism.
4. Turn on the flash and the FT-8 receiver. *
5. Set the flash to Manual mode.
Connecting a flash/strobe to the FT-8
receiver by sync cable
1. Turn off the flash/strobe and the FT-8 receiver.
2. Connect a cable to the receiver’s 3.5 mm Sync
Port.
3. Connect the opposite end of the cable to a flash
or studio strobe (a 6.3 mm adapter is included for
studio strobes with larger ports).
4. Turn on the flash/strobe and the FT-8 receiver. *
5. Set the flash/strobe to Manual mode.
* It is not unusual for the flash to discharge once after
turning on the FT-8
• 6 •