manualshive.com logo in svg

AODELAN E3+, Руководство пользователя

Поделиться
Скачать
AODELAN E3+ Скачать руководство пользователя страница 42

40

6. Take the pictures
Check that the < 

 > lamp of the master unit lights green and take the 

picture. The slave unit cameras are released in coordination with the master 

unit camera. After shooting with linked shooting, the < 

 > lamp of slave 

unit briefly lights orange.

7. Press function button 1 corresponding to 

 on master unit will 

release the shutter of all slave unit cameras. 

Noted: 
1.When using the linked shooting function, the slave unit camera might 

need a shutter release cable(available separately) depending on the 

camera models. 

1) EOS digital cameras since 2012 (excluding EOS 1200D) do not 

need to use shutter release cable.

2) EOS cameras before 2012, which are compatible with E-TTL II/E-TTL 

autoflash and come with N3 type remote terminal EOS, shutter release 

cable will be needed for linked shooting.

2. Shooting with manual focus is recommended for the slave unit cameras. 

If focus cannot be achieved with autofocus, linked shooting is not possible 

with the corresponding slave unit cameras.

Содержание E3+

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды