AOC T32013, Руководство по обслуживанию

Страница: 11 / 81

32" LCD-TV T32013
11
Store prog.: Allows to Save a channel on a new Program N°, to Insert a channel on an already existing Program No
(the channel previously saved on this program n° will be shifted to the upper program n°) or to Delete
the Program No.
- Once a channel has been found and named, use the À button to select the Store prog. Option.
- Using the
½
/
¾
buttons, select Save, Insert or Delete and press the OK button to confirm.
Swap prog.: Allows to swap 2 programme numbers.
- Using the ¿ / À buttons select the Prog. Number option.
- Using the
½
/
¾
buttons, select the program to be moved.
- Using the
À
button, select the Swap prog. option.
- Using the ¾ button, enter the swap function.
- Using the 0~9 digit, enter the new programme number (3 digits).
- Press the OK button to confirm, the programme numbers are swapped.
Norm: Allows changing the audio norm.
- Using the À button, select the Norm option.
- Using the
½
/
¾
buttons, select the norm.
Note: the following norms are available to choose from: I for the UK and Ireland, L/LP for France and Luxembourg,
D/K for Eastern Europe, the Middle East and Asia, B/G for Western Europe, Australia and New Zealand.
Skip: Allows skipping a channel.
- Using the
À
button, select the Skip option.
- Using the ½ / ¾ buttons, select on, the channel will be skip.
Repeat this procedure to skip other channels.
Fine-tuning: If the picture is not clear, you can adjust the setting.
- Using the À button, select the Fine Tuning option.
- Use the ½ / ¾ buttons to find the good tuning point.
Man. search: Allows launching a manual search.
- Using the À button, select the Man. search option.
- Using the ½ / ¾ buttons, start the search in decreasing or increasing order.
The menu is replaced by a sub-menu showing the progression of the search.
- The search will stop at the first channel found; Man. installation menu is displayed again (within 3 seconds).
- If you wish to memories the channel, select Store Program option using
¿
button and proceed as indicated in
previous page. Otherwise, continue the search using
½
/
¾
buttons.
If you have modified Norm, Skip, Fine-tuning options or if you have launched a Manual Search, select Store Prog.
Option using ¿ / À buttons and proceed as indicated above to save your modification.
Press the EXIT button to exit the PIP menu.