AOC S792-3 Series, Руководство по обслуживанию, Страница: 5 / 51

9
BRIGHTNESS V-MOIRE REDUCE
H-CENTER R-GAIN
H-SIZE G-GAIN
V-CENTER B-GAIN
V-SIZE R-BIAS
ZOOM G-BIAS
TOP COMER R-BIAS
BOTTOM COMER 9300 COLOR TEMPERATURE
PINCUSHION 6500 COLOR TEMPERATURE
TRAPEZOID DEGAUSS
PIN-BALANCE OSD EXIT
PARALLELOGRAM RETURN
ROTATION Vs LINEAR
HS
SUB-H-SIZE Vc LINEAR
HP
H-SIZE-PHASE B/I ON/OFF
Tm
User time
MENU Key to Quit the OSD window. Mean while the new setting data will be saved in the memory.
E. To switches the input signal to the other Timing Mode. Please follow step C ~ D to get the optimum picture.
F. Select the " " RETURN function and press the MENU Key, then the Factor Preset window will be
returned to the original OSD window.(user's operating condition)
G. The setting data of the CONTRAST, BRIGHTNESS, PIN-BALANCE, PARALLELOGRAM,
ROTATION, COLOR TEMPERATURE are common mode saved in the memory. Don't needed adjust it
individual at every timing Mode and save in the memory.
H Model select: for factory only, service engineer can't changed.
3. White Balance, Luminance adjustment:
A. Bias (Low Luminance) adjustment:
(a) Set mode 5 1024 x 768 Fh: 69KHz full white pattern.
(b) To make the adjustment condition is under the Factory preset window.
Same as step 2-C.
(c) Warm up more than 30 minutes.
(d) Brightness set to maximum. Contrast set to min. full white pattern, then adjust FBT screen
VR to make Y= 1.0FL
±
0.2FL
(e) Brightness set to raster just cutoff, adjust contrast to be 4FL, then adjust G-Bias , B-Bias ,
R-Bias , to make the setting value is(20), then adjust the R.G.B Bias individual to the color
temperature x= 270
±
5, y= 290
±
5.
B. Gain (High light) adjustment:
(a) Set mode 5 1024 x 768 Fh: 69KHz full white pattern.
(b) Brightness set to raster just cutoff and set the contrast to max.
BC BC BC BC
TC
TC TC
TC
BI BI BI BI