12
OSD Setting
Basic and simple instruction on the control keys.
Luminance
Color Setup
Picture Boost
OSD Setup
Exit
Extra
Contrast
50
Brightness
90
Eco mode
Standard
Gamma
Gamma 1
DCR
Off
Overdrive
Off
Image Setup
1). Press the
MENU-button
to activate the OSD window.
2). Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press the
MENU-
button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired function is
highlighted, press
MENU-button
to activate it.
3). Press
Left
or
Right
to change the settings of the selected function. Press
AUTO–button
to exit. If you want to adjust
any other function, repeat steps 2-3.
4). OSD Lock/Unlock Function: OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor
is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while
the monitor is off and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.
