-40-
Note 3: Auto search for Wi-Fi is performed, i.e., no additional steps are required to connect to the Wi-Fi network. For
some closed wireless networks, the username or password may be required.
Note 4: The availability of Wi-Fi signals may depend on the distance, infrastructure, and objects through which a signal
must pass.
Scan
Touch "Menu icon ( ) -> Scan" icon at the top right corner of screen to search for the available wireless networks in
the vicinity.
Advanced settings
Network notification
Select to notify you when an open network is available.
Keep Wi-Fi on during
sleep
Choose under which condition (Always, Only when
plugged in or Never) to keep Wi-Fi on when tablet is in
standby mode.
MAC address
Shows the tablet’s Wi-Fi MAC address
IP address
Shows the tablet’s IP address
Checking status of wireless network
You can check the status of the currently connected Wi-Fi through the following methods:
·
Status bar
After the product is connected to the wireless network, the
status bar shows the Wi-Fi icon “ ” and signal strength (the
number of the bars lighting up).
·
Wi-Fi network
In the network connection interface, touch “Wi-Fi settings” and
touch the currently connected wireless network to show the information, such as name, status, speed, signal strength,
and security.
Tip1: If you want to remove the network settings, touch “Forget” in this window. If you want to connect to this network,
the settings should be configured again.
Connecting to other Wi-Fi networks
In the “Wi-Fi” settings interface, touch “+” icon at the top right corner, enter the corresponding network settings, and
touch “Save”.
Tip 2: Not all wireless networks are connected to the Internet. Some wireless networks may be connected to several
computers and cannot be connected to the Internet.