PRECAUTIONS
z
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink,
laundry tub, swimming pool or in a wet basement.
z
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it
can injure a person and cause serious damage to the appliance. Use only a cart or
stand recommended by the manufacturer or sold with the monitor. If you mount the
monitor on a wall or shelf, use a mounting kit approved by the manufacturer and
follow the kit instructions.
z
Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the monitor and to protect it from
overheating, be sure these openings are not blocked or covered. Do not place the
monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over
a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless
proper ventilation is provided.
z
The monitor should be operated only from the type of power source indicated on the
label. If you are not sure of the type of power supplied to your home, consult your
dealer or local power company.
z
The monitor is equipped with a three-pronged grounded plug, a plug with a third
(grounding) pin. This plug will fit only into a grounded power outlet as a safety
feature. If your outlet does not accommodate the three-wire plug, have an electrician
install the correct outlet, or use an adapter to ground the appliance safely. Do not
defeat the safety purpose of the grounded plug.
z
Unplug the unit during a lightning storm or when it will not be used for long periods
of time. This will protect the monitor from damage due to power surges.
z
Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
z
Never push any object into the slot on the monitor cabinet. It could short circuit
parts causing a fire or electric shock. Never spill liquids on the monitor.
z
Do not attempt to service the monitor yourself; opening or removing covers can
expose you to dangerous voltages and other hazards. Please refer all servicing to
qualified service personnel.
z
To ensure satisfactory operation, use the monitor only with UL listed computers
which have appropriate configured receptacles marked between 100 - 240V AC,
Min. 2.5A.
z
The wall socket shall be installed near the equipment and shall be easily accessible.
z
Attention: Disconnect the power cord to stop the power supply to the monitor.