manualshive.com logo in svg

AOC e2260Swda, Руководство пользователя, Страница: 6 / 61

Поделиться
Скачать
AOC e2260Swda Скачать руководство пользователя страница 6

 

 

Installation 

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a 

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by 
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and 
use mounting accessories recommended by the manufacturer. A product and cart combination should be moved 
with care.     
 

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or 

electric shock. Never spill liquids on the monitor.     
 

Do not place the front of the product on the floor.   

 

If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit 

instructions.   
 

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence 

overheating may cause a fire or damage to the monitor.   
 
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on 
the stand:     

6

Содержание e2260Swda






























































Отзывы:

Нет отзывов