17 |
P a g e
D70V50G User Manual
www.aocindia.com
Charging the Battery
Use the charger provided in the box to charge the battery before using the device
for the first time. While using the device for the first time, it is advised to charge
the device completely for 8 hours. A computer can also be used to charge the
device by connecting them via the USB cable. But it is advised to charge the
device using the power adapter.
Use only AOC-approved chargers, batteries, and cables. Unapproved
chargers or cables can cause the battery to explode or damage the device.
When the battery power is low, the device emits a warning tone and
displays a low battery power message.
If the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to
charge for a few minutes before turning on the device.
If you use multiple applications at once, network applications, or
applications that need a connection to another device, the battery will
drain quickly. To avoid disconnecting from the network or losing power
during a data transfer, always use these applications after fully charging the
battery.
Charging with the charger
Connect the USB cable to the USB power adaptor and then plug the end of the
USB cable into the multipurpose jack. When using a USB 2.0 cable, plug the USB
cable into the right side of the multipurpose jack.
CAUTION:
Connecting the charger improperly may cause serious damage to the
device. Any damage caused by misuse is not covered by the warranty.
The device can be used while it is charging, but it may take longer to fully
charge the battery.
If the device receives an unstable power supply while charging, the touch
screen may not function. If this happens, unplug the charger from the
device.
While charging, the device may heat up. This is normal and should not
affect the device’s lifespan or performance. If the battery gets hotter than
usual, the charger may stop charging.