ii
Service:
• The casing cover should be opened only by qualified service personnel.
• If there is any need for repair or integration, please contact your local service center.
If your display does not operate normally, having followed the instructions in this document, please
contact a technician or your local service center.
Read and follow these instructions when connecting and using your display:
• Consult a service technician if the display does not operate normally when you have followed the
instructions in this manual.
• The back cover should be opened only by qualified service personnel.
• Keep the display out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into the vents or prevent proper cooling of the display’s
electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
• When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds
before re-attaching the power cable or DC power cord for normal operation.
• To avoid the risk of shock or permanent damage to the set do not expose the display to rain or
excessive moisture.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• This product’s power cord is equipped with a three-wire grounded plug. The plug only fits in a
grounded power outlet. Make sure the power outlet is properly grounded before inserting the
power cord plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician
for details.
•
IMPORTANT
: Always activate a screen saver program during your application. If a still image in
high contrast remains on the screen for an extended period of time, it may leave an ‘after-image’
or ‘ghost image’ on the front of the screen. This is a well-known phenomenon that is caused by the
shortcomings inherent in LCD technology. In most cases the afterimage will disappear gradually over
a period of time after the power has been switched off. Be aware that the after-image symptom
cannot be repaired and is not covered under warranty.
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
