Anzzi SD-AZ054-01 Series, Руководство по установке и эксплуатации

Страница: 16 / 18

Fig 12
Allow 24 hours for the silicone to
fully cure before using the shower.
Step 12
1. Apply a good quality Silicone Sealant at the
outer corner formed by the wall and the Wall
Post [01] , and the outer corner formed by tub
deсk and Fixed Panel [04] (Fig 12).
Hours
24
Step 11
1. Disassemble gaskets by removing handle knobs (Fig 11.1).
2. Install handle, washers and handle knobs to the Door Panel [05] . Tighten handle knob with
allen key to secure (Fig 11.2).
IMPORTANT: Ensure handle gaskets and washers are placed on each side of glass.
1 2
Fig 11
gasket
Allen Key
14
handle knob
handle