2
1.
Remove the rubber washer,metal
washer and lock nut from the faucet.
2.
Install faucet with oring under the flange
through center hole.
4.
Hand tighten further using a screw driver
to tighten lock nut screws.
5.
Connect hoses to the water supply and
tighten.Check all connections at arrows for
leaks.Retighten if necessary,but do not
overtighten.
6.
Remove the aerator and turn on faucet for
1-minute to flush debris from faucet and
feed lines.Turn faucet off and re-install
aerator.
3.
Re-install the rubber washer followed by
the metal washer and lock nut,then hand
tighten it.
Single-Handle Lavatory Faucet Installation
INSTALLATION MANUAL Tools You Will Need
：
Adjustable wrench
Hexagon wrench Philips Screwdriver
Notes before installation :
Maintenance
Please check that all components
are present.
1.
Use a soft cloth and vinegar to
remove hard-water spots.
1.
Check aerator(if present) regularly for
calcium build up are when water
stream is not optimum.
2.
DO NOT use caustic cleaning
products as the use will break down
finish and will void the product
warranty.
3.
Acceptable cleaners include vinegar
or mild non-abrasive liquid detergents.
4.
Before installation ensure that all
feed lines are clear of debris and
on/off valve is present.
2.
Ensure water pressure is between
20-125 PSI (includes combination of
hot and cold feed lines).
3.
Pictures in the manual are general in
content and may not represent
exactly your purchased faucet.If you
are having difficulties please contact
a professional plumber.
4.
If you will be away from home for an
extended period you should shut off
the main water supply.
5.
