Anztec QC-6601P, Инструкция по эксплуатации

Страница: 13 / 34

QC-6601P Rev 1.0 Page 13
Router with IP
translation/port forwarding
enabling connection from
off site PC
Off site PC
Web Interface
The web interface provides a convenient means of configuring and managing the QC-6601P. Anztec
recommend using Mozilla Firefox when accessing the QC-6601P via the web interface but most
browsers will work equally as well.
Accessing the Web Interface
If accessing the QC-6601P from the same local area network as the host PC, simply enter the
machine’s IP address into the browser address bar. The IP address is displayed on the Network Status
Display panel inside the machine.
If accessing the QW5961P from an off-site location through a router you will need to ensure translation
between the outside IP address and the internal IP address is enabled – this is often referred to as ‘port
forwarding’. In this case, you will need to enter the external IP address of the site into the browser
address bar. Note that when using this configuration, it is a good idea to make the IP address of the
QC-6601P static. This will ensure that the DHCP server does not assign a different IP address to the
QC-6601P and prevent login from an external location. For instructions on how to make the IP static,
see the network configuration section of this manual. If in doubt about any of the configuration
instructions detailed here, seek the guidance of a competent IT professional.
After successful connection through your browser the login screen will appear.