With your cart plugged in, open the rear panel door and press the internal
Power Button
labeled PWR on the charging system.
If your cart powers on, unplug the
Switch Cable
from the
Charging System.
Using a small flat head screwdriver, ensure all individual wires are secure.
Plug the
Switch Cable
back into the
Charging System
then press the
External Power Button on the side of your cart.
If the External Power Button does not light up or power on, replace it.
Step 4: Testing the External Power Button
1
5 Minute Timer for AC-PLUS Only
Step 5: Determining your Model Number
15
Min
10
Sec
1.
2.
3.
4.
5.
Part # 1
32
1
375
Remove all plugs from the outlets of your
Charging System.
Power on your system by pressing the
internal
Power Button
.
Verify the “A” LED illuminates for
1
5 minutes.
Then verify the “B” red LED illuminates for
1
5 minutes.
If either does not, replace the
Charging System
.
1.
2.
3.
4.
5.
Remove all plugs from the outlets of your
Charging System.
Power on your system by pressing the
internal
Power Button
.
Verify the “
1
” and “2” LEDs illuminate for about
1
0 seconds.
Verify the “3” and “4” LEDs illuminate for about
1
0 seconds.
Finally, verify all four LEDs illuminate for about
1
0 seconds.
If this sequence does not occur, replace the
Charging System
.
1.
2.
3.
4.
5.
6.
Intelli-Sense Smart Charging System
Part # 1323198
Find the model name and serial number sticker.
This sticker may be on the side or back.
Determine which
Charging System
is installed by
opening the back door / panel.
1.
2.
AC-MANAGE 1
AC-PLUS 0001
AC-MINI 0001
AC-SLIM 0001
Step 6: Testing the Charging System
Model and Serial Number
Sticker Location
For AC-PLUS-T
Part # 1323152
For AC-45 only
Part # 1323855
10
Sec
10
Sec
15
Min
AC-SLIM 0001
AC-PLUS 0001
AC-MINI 0001
Electrical Troubleshooting
Specifications subject to change without notice
© 2017 Anywhere Cart | 42400 Winchester Rd Temecula, CA 92590 | 888-650-4488 | www.AnywhereCart.com
