Anywave TSP-EAS-1, Руководство пользователя

Страница: 11 / 30

TSP-EAS-1 User Manual
Version 1.6 5/10/2017 Page 11 of 30
2) If there is no TS detected and locked on a particular ASI input, ASI_IN sub menu will show “NULL”
Table 10 MUX_OUT Menu
CTRL PSIP_BW TS_RATE PROGRAM
Default Static 500kb 19.390Mb (see PROGRAM sub-menu)
Options
Static
Dynamic
Disable
Note:
1) The CTRL parameter sets the PSIP source, option “Static” means insert PSIP using MUX’s built-in
static PSIP, “Dynamic” means insert PSIP from Dynamic PSIP module, “Disable” means disable PSIP
insertion.
2) PSIP_BW parameter specifies the PSIP overhead bandwidth in output TS.
3) TS_RATE parameter specifies the output TS rate.
Table 11 PROGRAM Sub-Menu
Channel Sht_Name
Maj_Num Min_Num
Default 1 AW-TV1
05 001
Options
1 AW-TV1
05 001
2 AW_TV2
05 002
… …
… …
Note:
1) The PROGRAM Sub menu specifies the static PSIP information of the output TS, these settings only
take effect when “CTRL” is set to “Static”.
2)
Move cursor to “Channel” and press “UP” or “DOWN” button to browse program list.
3)
Move cursor to “Sht_Name”, “Maj_Num” and “Min_Num” and then press “UP” or “DOWN” to select
the desired alpha-numeric character.
Table 12 SDI_OUT Menu
*SOURCE1
SOURCE2 SOURCE3 SOURCE4
Default Value AUTO AUTO AUTO AUTO
Options/Values
AUTO AUTO AUTO AUTO
CVBS CVBS CVBS CVBS
SDI SDI SDI SDI
EAS EAS EAS EAS
Note:
1) "SOURCE#" selects where the source of each SDI_OUT comes from, they can be configured separately.