PA-U8D-C-FA User Manual
ACT-PAU8D-USR-DOC-V2.0, 05/20/2022
Page 27 of 33
corresponding configuration screen of IP or Mask or GateWay accordingly. Using the IP setting
as an example, Press any part of the white bar on the IP Setting Screen, and the keyboard (shown
below) will be enabled, turning from grey to yellow. The user can only set 3-digits of one bar at a
time. When the configuration is finished, press OK to confirm. If the keyboard is enabled by
mistake, press Cancel to exit the setting mode. Don’t press Ok without entering a valid number,
otherwise, the system will fill it with all zeros instead.
Time Screen
: This screen is used to check and adjust the current time settings. It’s similar to
the Network Settings.
