Units 5 & 6 Hillside Industrial Estate
London Road, Horndean,
Hampshire, PO8 0BL
Tel +44 (0)23 9259 9410
Fax +44(0)23 9259 8723
Page 2 of 13
AT1039 Issue 1
Anyscene 512 Operating
Instructions
1. Overview and Operation
The front panel has ten buttons and ten LED indicators. Switches labelled 1-7 have their
own blue mimic LEDs and are used for storing and recalling the contents of the 23
programmable memories.
The Up and Down buttons are normally used to control the Master level, allowing control
of the overall lighting level. They also provide access to the upper and lower memory
banks, each of eight scenes.
The green power LED shows when the unit is powered up, and the yellow data LED
indicates that the unit is receiving suitable programming data from a DMX source. Switch
0 is the blackout switch and when enabled the corresponding red LED will flash to indicate
the unit is in this mode.
The RJ45 sockets are on the back of the PCB along various option DIL switches and the
connectors for the external scene recall control.
The Anyscene 512 is also available with a reduced number of buttons for applications that
require less than the standard number of scenes. These include a 4-button version
allowing four user defined scenes to be programmed / recalled and a 5-button version that
also has the four user defined scenes, plus the blackout function / button of the standard
unit.
2. Mounting
The Anyscene 512 should be mounted using UK double pattresses with an approximate
depth of 32 mm.
