Note：When RFG function is on the LCD displays R if RFG level is 6 means the
attenuation is 6dBm.
Note：In lock Mode all keys except PTT is valid.
Scan function
RF Gain contro
Emergency Channel
Keypad Lock
Norms control
Install external speaker
Resume factory default
Hold
11
to start scan function, "SC" falshes in the LCD;
Press [
21
UP
] or [
DN
] to change scan direction during scan;
Press
31
or [
PTT
] key to exit scan function.
Short press
11
key, LCD displays R and the present RF gain level flashes.
Short press microphone [
21
UP
] or [
DN
] to change level.
Short press
31
key to exit RF gain level control.
Short press
11
key to choose CH9, the channel number flashes.
Short press
21
key again to choose CH19, the channel number flashes.
Short press
31
key third time to return to last normal channel.
Hold
11
key for over 2 seconds to lock the keys, LCD displays "LC".
Hold
21
key for over 2 seconds again to unlock the keys, LCD displays OF.
Hold
11
to power on radio, until LCD displays the norms;
Press [
21
UP
] or [
DN
] to choose wanted norms;
Power off and power on again.
31
Choose a 8Ω external speaker with 3.5mm mono connector.
Hold
11
key to power on radio, until the LCD displays "RT", the resume work
finish.
All channel and function setting will resume factory default after above operation.
21
