AnyTone AT- 778UV, Инструкция по эксплуатации

Страница: 16 / 36

12
AT-778UV UHF/VHF Two Way Radio
6. BASIC OPERATIONS
6.1 Switching the Power On/Off
6.2 Adjusting the Volume
6.3 Adjusting Frequency
6.4 Adjust Channel
1. In standby mode, short press the [PX] key programmed as VOL control, the LCD
GLVSOD\
VOL:XX
WKHQWXUQWKHFKDQQHOVZLWFKWRDGMXVWYROXPHOHYHO
2. In standby mode, short press
WRPXWHWKHVSHDNHUWKH/&'GLVSOD\
AUDIO:MT
short press it again to return last volume level.
1. Power On: in power off state press
WKH/&'GLVSOD\V
WELCOME
WKHQZLOO
displays current frequency or channel.
2. Power Off: in power on state, press
IRUVHFRQGVWKH/&'GLVSOD\V
CLOSING
then the LCD display disappears.
1. By channel knob: In VFO mode, turn channel knob can adjust frequency, push channel
NQREWKHPDWFKLQJFKDUDFWRUZLOOÀDVKWKHQWXUQFKDQQHONQREWRDGMXVWWKHIUHTXHQF\
by step size 1K, 10K, 100K, 1Mz or 10MHz.
1. Adjust channel by channel switch: In channel mode, turn channel knob to adjust the
channel, the [UP]/[DOWN] key in the microphone can also adjust the main channel.
»
During communication, volume level can be adjusted more accurate.
»
7KHPLFURSKRQH>83@>'2:1@NH\FDQDOVRDGMXVWWKHIUHTXHQF\HDFKSUHVV
move one step size. hold the [DOWN] key can decrease one step size. if the
channel knob is programmed as VOL function, users need press the PX key which
programmed as FRQ function, when the LCD displays "VFO FREQ", turn channel
NQREWRDGMXVWIUHTXHQF\
»
,IWKHUHLVDQHPSW\FKDQQHOWKHUDGLRZLOOMXPSRYHULWWRQH[WFKDQQHO,IWKH
channel knob is programmed as VOL function, users need press the PX key which
programmed as CH function, when the LCD displays "CH XX ", turn channel knob
to adjust channel.
2. By number key: In VFO mode, you can input wanted frequency by the microphone
number key. For example if want 145.125Mhz, just press key 1, 4, 5, 1, 2, 5, if want
145Mhz, just press 1, 4, 5. The input is invalid if the frequency is over range.
2. By number key: In CH mode, you can input wanted channel by the microphone input
QXPEHUVVWDQGVIRUFKDQQHOVWDQGVIRUFKDQQHOLILQSXW
channel is an empty channel, the radio will report error and return to last channel.